about how to reduce the probability of drum burning?

How do drum assembly line manufacturers reduce the probability of electric drum burning?

1. Regularly maintain the electric roller. Relevant parameters should comply with relevant regulations.


2. In the production process, according to the nature of the material to be transported, timely cleaning, in order to keep the conveyor parts clean.


3. Electric roller to replace the lubricating oil once a year, found that there is leakage, should check the sealing part, and replace the worn oil seal.


4. The electric roller should be repaired every year under normal circumstances.


The maintenance content is as follows: clean the lubricating oil in the drum by draining the oil hole on the left end cover of the drum, and then disintegrate the drum to clean its internal parts and inner wall. For each bearing into plenty of sodium calcium base grease replacement motor and cylinder body of the sealing ring and oil seal, the change of electric drum sealing ring and oil seal must be intact, smooth and no small convex and concave, also cannot have crease, its material must check each bearing with oil resistant rubber, non-return device and the abrasion of gear, Inject new HU-30 steam turbine oil into the drum to make the liquid level reach 1/3 of the diameter of the drum. Check the rotor of the disk moving drum motor should be flexible, and there should be no sound of jamming. The motor is clean and free of debris inside.


If you have any decoration questions, welcome to inquire, we will be dedicated to solving all your problems. Welcome to call our hotline at any time, we will serve you wholeheartedly! For more information, call 0760-22285136


Related labels: drum assembly line manufacturer http:///