1. Lamp pole: lamp pole, lamp pole, lamp pole, lamp pole, lamp pole, lamp pole, lamp pole, lamp pole, lamp pole, lamp pole

1、燈桿材質選用上海寶鋼產優質低碳鋼Q235A型，鋼材的硅含量不高于0.04%，經大型折彎?rùn)C(jī)一次折彎成型，直線度誤差不超過0.05%，燈桿的抗風能力按36.9米/秒11級以上設計，抗地震烈度為8級。

1. The material of lamp pole is Q235A, a high-quality low-carbon steel produced by Shanghai Baosteel. The silicon content of steel is not higher than 0.04%. The straightness error of lamp pole is less than 0.05% after one bending by a large bending machine. The wind resistance of lamp pole is designed to be above M 36.9 m/s 11 and the seismic intensity is M 8.

2、桿體總高X米，上口徑為Xmm，下口徑為Xmm，壁厚Xmm。燈桿底部帶有法蘭盤，法蘭盤安裝孔距為?X，通過地腳螺栓安裝在基礎上。（X為用戶設定的參數，或由公司按常規配置）

2. The total height of the rod body is X meters, the upper diameter is Xmm, the lower diameter is Xmm, and the wall thickness is Xmm. The bottom of the lamp pole is equipped with a flange, and the flange mounting hole spacing is? X. The flange is mounted on the base through the foot bolt. (X is a user-defined parameter, or is configured by the company as usual)

3、燈桿焊接方式為自動埋弧焊接，焊接可靠，表面光滑，無明顯的氣孔、焊瘤、咬邊等焊接缺陷，超聲波探傷檢驗，達焊接GBl1345Ⅱ級標準要求。

3. The welding mode of lamp pole is automatic submerged arc welding. The welding is reliable, the surface is smooth, and there are no obvious welding defects such as gas holes, welding nodules, undercut, etc. The ultrasonic flaw detection test meets the requirements of GBl1345 Class II standard.

4、鋼桿防腐處理采用內外熱鍍鋅，鍍鋅工藝過程經過酸洗、熱鍍鋅、水洗、磷化、鈍化等過程，鍍鋅層表面光滑美觀，光澤一致，無皺皮、流墜及鋅瘤、起皮、斑點、陰陽面等缺陷存在，鋅層厚度達到 86um以上，符合國家標準GB/T13912-92，鍍鋅層附著力符合GB2694-88的要求，防腐壽命大于30年。

4. Hot-dip galvanizing is used for steel rod anticorrosive treatment. The galvanizing process includes pickling, hot-dip galvanizing, water washing, phosphating and passivation. The surface of the galvanized layer is smooth and beautiful, with uniform luster. There are no wrinkles, falling, galvanizing tumors, peeling, spots, Yin and yang. The thickness of the galvanized layer is over 86um, which meets the national standard GB/T13912-92, and the adhesion of the galvanized layer is in line with GB2694-88. Requirements, anticorrosion life is longer than 30 years.

5、燈桿熱鍍鋅后進行靜電噴塑（顏色可選擇），噴塑前先磨砂以增加附著力，噴塑過程中嚴格控制固化時間和溫度，保證塑層均勻、光滑、無氣孔。噴塑層厚度≧1Ooum，附著力達到GB9286-880級，表面光滑，硬度≧2H。

5. Electrostatic spraying of lamp pole after galvanizing (color is optional), grinding before spraying to increase adhesion, curing time and temperature are strictly controlled during spraying process to ensure uniform, smooth and non-porous plastic layer. The thickness of sprayed layer is more than 1 Ooum, the adhesion is GB9286-880, the surface is smooth, and the hardness is more than 2 H.

二、燈具：

2. Lamps and lanterns:

1、燈體、燈蓋采用鋁合金壓鑄，表面經靜電噴塑處理，結構輕巧耐腐蝕。燈具外殼防腐蝕性能Ⅱ級；防護等級IP65；防觸電等級Ⅰ類。符合《燈具安全要求及試驗》（GB7000.1-7000.6）的規定。

1. The lamp body and lamp cover are made of aluminium alloy by die casting. The surface is treated by electrostatic spraying, and the structure is light and corrosion-resistant. Anti-corrosion performance of lamp shell II; Protection grade IP65; Anti-shock grade I. It meets the requirements of "Safety Requirements and Tests of Lamps" (GB7000.1-7000.6).

2、反射器采用高純鋁壓制成型，經陽極氧化電化學拋光處理，具有光學性能穩定，反射率高的特點。

2. The reflector is made of high purity aluminium and processed by anodic oxidation and electrochemical polishing. It has the characteristics of stable optical performance and high reflectivity.

3、透光罩采用曲面高強度鋼化玻璃，耐高溫200℃以上，透光率高，耐沖擊。

3. The transparent cover is made of high strength toughened glass with curved surface. It can resist high temperature above 200 C, high transmittance and impact.

4、反射器、鋼化玻璃罩以及燈座用密封膠粘成一體，組成內換泡結構，具有良好的密封性能，密封圈耐高溫250℃以上，密封程度達IP66。

4. Reflector, tempered glass cover and lamp holder are glued together with sealant, forming an inner bubble-changing structure, which has good sealing performance. The sealing ring can withstand high temperature above 250 C, and the sealing degree reaches IP66.

三、電器：

Electrical appliances:

采用上海飛利浦250W高壓鈉燈，配飛利浦鎮流器、觸發器、電容，飛利浦節能燈。（或用戶選擇的其它品牌）

Shanghai Philips 250W high pressure sodium lamp, with Philips ballast, trigger, capacitor, Philips energy-saving lamp. (or other brands chosen by users)

四、其它技術參數:

4. Other technical parameters:

1、燈桿高度：±5%

1. Lamp pole height: +5%

2、梁臂桿高（長）：±1%

2. Beam arm height (length): +1%

3、額定工作電壓：220V(有效質)

3. rated working voltage: 220V (effective quality)

4、額定絕緣電壓：500V(有效質)

4. Nominal Insulation Voltage: 500V (Effective Quality)

5、額定頻率：5OHz

5. Rated Frequency: 5OHz

6、絕緣電阻：≧5OOMQ

6. Insulation Resistance: > 5OOMQ

7、介電強度：能承受交流5Ohz、15OV(有效質)，實驗電壓歷時lmin無擊穿或閃絡現象

7. Dielectric strength: It can withstand 5Ohz, 15OV (effective quality) of AC. There is no breakdown or flashover in the experimental voltage duration lmin.

8、功率因素：cns∮≧0.85

8. Power factor: cns> 0.85

9、燈具防觸電保護類別：Ⅰ類

9. Classification of protection against electric shock of lamps and lanterns: Class I

10、接線方式：?jiǎn)蜗?/span>

10. Wiring mode: single phase

11、燈具效率：≧75%

11. Lamp efficiency: > 75%

12、防護等級：IP65

12. Protection Level: IP65

13、反光器材料：3002-0高純鋁板

13. Reflector Material: 3002-0 High Purity Aluminum Plate

14、燈罩材料：高透明耐強曲面鋼化玻璃

14. Lampshade Material: High Transparency and Strength Resistant Curved Surface Tempered Glass

15、燈具配光曲線：翼型的配光曲線

15. Light Distribution Curve of Lamps: Light Distribution Curve of Airfoil

16、燈具全部電器(鎮流器、觸發器、電容器)均安裝在燈具內

16. All electrical appliances (ballasts, flip-flops, capacitors) of lamps and lanterns are installed in lamps and lanterns.

五、檢驗標準：

V. Inspection criteria:

燈桿檢驗標準：質量管理手冊、檢驗、試驗規范及相應國標與工藝技術文件。

Lamp pole inspection standards: quality management manual, inspection, test specifications and corresponding national standards and technical documents.

燈具檢驗標準：GB3037-91及相應國標與工藝技術文件。

Lighting Inspection Standard: GB3037-91 and relevant national standards and technical documents.

六、包裝：

6. Packaging:

路燈桿編織帶包裝、燈具裝箱包裝。

Street lamp pole braided tape packaging, lamp packaging.